Category 0 - 3 Point LIft Plate - OEM Replica
$195.00 / ea, PN# CC-03-002
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100. Similar to Cub Cadet #703-0808 UNPAINTED
82 Series Category 0 - 3 Point Lift Replacement Plate
$195.00 / ea, PN# CC-03-002M
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100 - but with multi lift configurations. Similar to Cub Cadet #703-0808 UNPAINTED
Quietline Category 0 - 3 Point Lift Plate
$195 CC-03-002MQ
Rear plate only for the Quietline and similiar tractors. Plate only - non painted.
Category 0 - 3 Point Lift Arms
$115.00 / Set, PN# CC-03-006
Reproduction Category 0 - 3 point Lift Arms. Sold as a set. Similar to Cub Cadet #703-0815 UNPAINTED
Super Garden Tractor Drag Arms and Lift Link Adjusters
$245.00 / Set, PN# CC-03-043K
Reproduction Drag Arms and Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a complete kit as shown. Unpainted
Super Garden Tractor Drag Arms
$170.00 / Set, PN# CC-03-043
Reproduction Drag Arms for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted
Super Garden Tractor Lift Link Adjusters
$138.00 / Set, PN# CC-03-047
Reproduction Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted
SGT Lift Link Adjusters - Threaded Ball Ends
$68.00 / Set, PN# CC-03-047-T
These are the ball and threaded end of the above lift link. Ball end has a 1/2" hole, and the threaded end is 1/2" fine threads. Extra heavy duty vs. the original ones. Comes as a pair. Unpainted
Cub Cadet Category 0 - 3 Point Lift Link Kit
$95.00 / Set, PN# CC-34-002
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. 5/8 Furrels. Exact Replicas. Sold as a set. UNPAINTED Similar to Cub Cadet #703-0814 & 711-3122
Cub Cadet Category 0 - 3 Point Lift Link
$56.00 / Set, PN# CC-34-013
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. Sold each. Similar to Cub Cadet #703-0814
Cub Cadet Category 0 - 3 Point Extended Lift Link
$64.00 / Set, PN# CC-34-013L
Just like the original ones, (CC-34-013) but 1.5" longer. Allows you to run equipment that is lower to the ground.
Cat 0 Replacement Ferrules
$64.00 / Set, PN# CC-03-012
Replacement ferrule for Cub Cadet 3 point lifts. 5/8" Threaded hole, 5/8" Stud, 1/8" Pin Hole. Similar to Cub Cadet #711-3122
Category 0 - 3 Point Lift Cross Chain Set
$64.00 / Set, PN# CC-33-002
Turnbuckle Chain set keeps your equipment from swinging side to side. Has a 250# load buckles. Stainless steel loops bolt to your arms, providing a nice clean attachment point. Comes with hardware. Will fit other brands.
Category 0 - Adjustable 3rd Link
$40.00 / ea, PN# CC-35-002
Connects the 3rd link to your implement. Completely adjustable from 10" to 15". 5/8" holes. Comes with hole in the middle and rod to make it a T-Handle. Similar to Cub Cadet # 749-0238
SGT Category 0 - Adjustable 3rd Link
$82.00 / ea, PN# CC-35-002S
This is the upper 3rd link for the Super Garden Tractors that have the factory 3 point setup on them. The top link uses a 1/2" dia pin instead of the 5/8" like the regular garden tractors. Connects the 3rd link to your implement. Comes with hole in the middle and rod to make it a T-Handle.
3 Point Flat Drawbar
$62.00 / ea, PN# CC-98-032
Fits category 0 three point hitches. The ends are 5/8" diameter with 1/4" holes for retainer pins. The (7) holes in the bar are 3/4" for ball hitches and other pins. Length of the drawbar usable area is 19". Most other ones on the market only offer the 5/8" doles on the drawbar body section.
3 Point Flat Drawbar Locks
$52.00 / SET, PN# CC-96-060
If you have a category 0 3 point drawbar (CC-98-002) then these drawbar locks are a must. Keeps the drawbar from rotating if using a ball hitch. Clips on with D-Clips (included) and sold in pairs. UNPAINTED
3 Point Upper Link Bracket
$40.00 / ea, PN# CC-03-050
Manufactured adjustable 3 point upper link bracket. If you have an original Cub Cadet 3 point lift, and are missing this bracket, now you can get a manufactured reproduction. UNPAINTED
Category 0 - Draft Pins
$7.00 / ea, PN# CC-36-003
Used for Cat. 0 projects. 5/8" shaft , 5/8" Threaded end. Includes nut and lock washer
Cub Cadet Category 0 - 3 Point Lift Link Shafts
$70.00 / ea, PN# CC-03-007A
$80.00 / ea, PN# CC-03-007B
Connects the 3 point to the hydraulic cylinder. 82 Series, Spread Frames - Unpainted. Similar to Cub Cadet #703-0811 CC-03-007B would fit the Super Garden Tractors: 982, 1912, 1914, 1872, 2072,1572,1772, 1782, 1882, 2082, 2182, 2084, 2184, 2284, 2086 with our Category 0 3 point kits.
Cub Cadet Category 0 - 3 Point Lift Link - QL
$70.00 / ea, PN# CC-03-014
Connects the 3 point to the hydraulic cylinder. Quietline Tractors only - Unpainted. 1250, 1450, 1650
3 Point Load Lock
$48.00 / ea, PN# CC-03-020
If you have a 3 point and want to hold it in the up position while you use the mower deck, you can use this adjustable dog-bone link to hold the load in the up position. Comes with the (2) 1/4" plates and (1) 1/2" plate, bolts and weld on tab for your equipment. Additional weld on tabs available separately. UNPAINTED
3 Point Load Lock Clevis
$14.00 / ea, PN# CC-03-021
Weld this clevis onto your implement to attach the load lock to. 5/8" dia. holes. Can also be used for building cat 0 equipment connections. UNPAINTED
Category 0 Suitcase Weight Adaptor
$125.00 / ea, PN# CC-19-200
A weight bracket for holding suitcase weights on your 3 point lift. Category 0 attachments. 1/2" x 2" bars allow hanging of most all garden tractor suitcase weights on the front side, back side or both. UNPAINTED.
